Covering Stowmarket and the surrounding area Monday to Friday 0900 to 1700 Request a call-out

High Pressure Water Jetting in Rushmere St Andrew - Repair or Replace, and When Each Makes Sense

When drains in Rushmere St Andrew keep blocking, the question is whether high pressure water jetting is the right long-term answer or whether the pipe itself needs attention.

Est. 2025 Told what it will cost before we start You see what was wrong Cleared up before we leave
High Pressure Water Jetting - work in progress

Jetting clears the obstruction but it does not fix the pipe. If a drain blocks repeatedly within a short period after clearing - months rather than years - there is usually a structural reason. Root ingress through cracked joints is the most common: jetting cuts back the roots and restores flow, but unless the crack is repaired or the roots are chemically treated, the same roots regrow into the same gap. Displaced or bellied pipe sections create a low spot where silt and debris accumulate faster than normal; jetting clears the silt but the low spot remains. In both cases, a CCTV survey after clearing the line gives you a picture of what is actually happening so you can make a decision based on evidence rather than guesswork.

Repair options have improved significantly. For minor cracks and joint defects in pipes from around 100mm to 300mm diameter, cured-in-place lining (often called patch lining or full-length relining) installs a resin sleeve inside the existing pipe without excavation, restoring structural integrity and a smooth bore. This costs considerably less than open-cut replacement and causes far less disruption. Excavation and pipe replacement still makes sense where the pipe has collapsed, where the alignment is significantly wrong, or where root damage is severe across a long section. The decision hinges on what the CCTV shows - ask the contractor to give you the footage and a written summary before you agree to anything beyond the initial jet.

What you get

  • Chambers lifted and the run checked, so the work starts from what is actually happening rather than from the symptom.
  • The blockage cleared with the right tool for the pipe: rods, a machine or the jetter, chosen so the pipe is not damaged getting through it.
  • The cause looked for once it runs, on camera where it is not obvious from the chamber.
  • What we found explained in plain words, with stills or footage if you want them.
  • The area washed down and the covers back properly before we leave.

High Pressure Water Jetting in Rushmere St Andrew?

Ring and speak to the engineers who will be doing the work, or send the form with the postcode and what is happening.

Call Call-out